What Is Stainless Steel and How Is It Made?

From the mines to the manufacturer, here’s a quick overview of how stainless steel is made

Due to its excellent corrosion resistance, high strength and attractive appearance, stainless steel sees a wide range of uses across both industrial and consumer markets.

But how does stainless steel go from a pile of scrap or refined ores to its final shape and application?

Most stainless steel starts life in a similar manner before heading off to processing. This processing—along with the exact composition of the steel alloy—determine its many characteristics.

So to understand how stainless steel is produced, we must first dive into its composition.

What is Stainless Steel?

Stainless steel is an iron and chromium alloy.

While stainless must contain at least 10.5% chromium, the exact components and ratios will vary based on the grade requested and the intended use of the steel.

 Other common additives include:

  • Nickel
  • Carbon
  • Manganese
  • Molybdenum
  • Nitrogen
  • Sulfur
  • Copper
  • Silicon

The exact composition of an alloy is strictly measured and assessed throughout the alloying process to ensure the steel exhibits the required qualities.

The common reasons to add other metals and gasses to a stainless steel alloy include:

  • Increased corrosion resistance
  • High temperature resistance
  • Low temperature resistance
  • Improved strength
  • Improved weldability
  • Improved formability
  • Controlling magnetism

What’s in your stainless steel isn’t the only factor in determining its unique characteristics however…

How it’s made will further alter the steel’s properties.


How Stainless Steel is Made

The exact process for a grade of stainless steel will differ in the later stages. How a grade of steel is shaped, worked and finished plays a significant role in determining how it looks and performs.

Before you can create a deliverable steel product, you must first create the molten alloy.

Because of this most steel grades share common starting steps.

Step 1: Melting

Manufacturing stainless steel starts with melting scrap metals and additives in an electric arc furnace (EAF). Using high-power electrodes, the EAF heats the metals over the course of many hours to create a molten, fluid mixture.

As stainless steel is 100% recyclable, many stainless orders contain as much as 60% recycled steel. This helps to not only control costs but reduce environmental impact.

Exact temperatures will vary based on the grade of steel created.

Step 2: Removing Carbon Content

Carbon helps to increase the hardness and strength of iron. However, too much carbon can create problems—such as carbide precipitation during welding.

Before casting molten stainless steel, calibration and reduction of carbon content to the proper level is essential.

There are two ways foundries control carbon content.

The first is through Argon Oxygen Decarburization (AOD). Injecting an argon gas mixture into the molten steel reduces carbon content with minimal loss of other essential elements.

The other method used is Vacuum Oxygen Decarburization (VOD). In this method, molten steel is transferred to another chamber where oxygen is injected into the steel while heat is applied. A vacuum then removes vented gases from the chamber, further reducing carbon content.

Both methods offer precise control of carbon content to ensure a proper mixture and exact characteristics in the final stainless steel product.

Step 3: Tuning

After reducing carbon, a final balancing and homogenization of temperature and chemistry occurs. This ensures that the metal meets requirements for its intended grade and that the steel’s composition is consistent throughout the batch.

Samples are tested and analyzed. Adjustments are then made until the mixture meets the required standard.

Step 4: Forming or Casting

With the molten steel created, the foundry must now create the primitive shape used to cool and work the steel. The exact shape and dimensions will depend on the final product.

Common shapes include:

  • Blooms
  • Billets
  • Slabs
  • Rods
  • Tubes

Forms are then marked with an identifier to track the batch through the various processes to follow.

From here steps will differ depending on the intended grade and final product or function. Slabs become plates, strips and sheets. Blooms and billets become bars and wires.

Depending on the grade or format ordered, a steel might go through some of these steps multiple times to create the desired appearance or characteristics.

The following steps are the most common.

Hot Rolling

Performed at temperatures higher than the recrystallization temperature of the steel, this step helps to set the rough physical dimensions of the steel. Precise temperature control throughout the process keeps the steel soft enough to work without altering the structure.

The process uses repeated passes to adjust the dimensions of the steel slowly. In most cases, this will involve rolling through multiple mills over time to achieve the desired thickness.

Cold Rolling

Often used when precision is required, cold rolling occurs below the recrystallization temperature of the steel. Multiple supported rollers are used to shape the steel. This process creates a more attractive, uniform finish.

However, it can also deform the steel’s structure and often requires heat treatment to recrystallize the steel to its original microstructure.


After rolling, most steel undergoes an annealing process. This involves controlled heating and cooling cycles. These cycles help to soften steel and relieve internal stress.

The exact temperatures and times involved will depend on the grade of steel, with both heating and cooling rates impacting the final product.

Descaling or Pickling

As steel is worked through the various steps, it often accumulates scale on the surface.

This accumulation isn’t simply unattractive. It can also impact the stain-resistance, durability and weldability of the steel. Removing this scale is essential to creating the oxide barrier that gives stainless it’s characteristic corrosion and stain resistance.

Descaling or pickling removes this scale using either acid baths (known as acid pickling) or through controlled heating and cooling in an oxygen free environment.

Depending on the final product, the metal might return to rolling or extruding for further processing. This is followed by repeated annealing phases until achieving the desired properties.


Once the steel is worked and ready, the batch is cut to fit order requirements.

The most common methods are mechanical methods, such as cutting with guillotine knives, circular knives, high-speed blades or punching with dies.

However, for complex shapes, flame cutting or plasma jet cutting may be used as well.

The best option will depend on both the grade of steel requested and the desired shape of the delivered product.


Stainless steel is available in a variety of finishes from matte to mirror. Finishing is one of the last steps involved in the manufacturing process. Common techniques include acid or sand etching, sand blasting, belt grinding, belt buffing and belt polishing.

At this point, the steel is gathered in its final form and readied for shipping to the customer. Rolls and coils are common ways to both store and ship large quantities of stainless for use in other manufacturing processes. However, the final form will depend on the type of steel required and other factors specific to the order.

Final Thoughts

Understanding the proper stainless steel grades and types for specific uses and environments is an essential part of ensuring long-lasting results and optimizing costs. Whether you’re looking for something strong and corrosion-resistant for marine environments or something stunning and easy to clean for restaurant use, there’s a stainless steel alloy available to suit your needs.

If you’re curious how stainless steel might work for your next project, consult with Unified Alloys. As a leading source of stainless steel throughout Canada for more than 40 years, we have the knowledge and resources to help you find the ideal product for your requirements.

Unified Alloys will not be responsible for the accuracy or currency of any of the information contained herein. The specifications and information contained in the brochures are subject to change without notice.
Unified Alloys expressly disclaims any liability for loss or damage caused by use of any information contained in this publication, including any special, incidental or consequential damages arising from such use.
Nothing in this publication shall create or imply any warranty whether expressed or implied.