Primary, secondary and vent valve applications
Primary, secondary and vent valve applications and installations
Parker Hannifin’s response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining of piping and instrument valves into a single unit has benefitted various markets. We now offer a range of Ultra-Low Emission products which meet class ‘A’ or class ‘B’ levels of ISO 15848 standard for Ultra-Low emissions, as required.
Parker Hannifin can offer the unique combination of double block and bleed valve systems together with integral fittings, both being designed and produced by one company. Selection of this combination results in the elimination of taper thread connections and the need for thread sealant. For more information on leak path reductions and how to combine connections and valves into one unit.
Product Overview
Parker’s ProBloc series modular valves are designed to replace conventional multiple-valve installations currently in use for interfacing with pressure measuring systems. The traditional way of creating a double block and bleed valve was to use three separate single isolate ball valves, a tee piece to join them together and a flanged weldolet to connect to the process pipeline. This was modified to bolt three valves together using through bolts and was referred to as a modular valve.
No supporting is needed as the modular valve is small and light compared to the original method, It is easier to operate as the three valves are much closer together. By building three valves into one body to create double block and bleed valve you reduce the amount of potential leak paths, reduce the weight which is critical in offshore facilities, reduce the size and therefore the space taken up, very important offshore but also in onshore applications.
By combining customer-specified ball and needle valves into a single manifold, Parker’s ProBloc modular valves significantly reduce the number of potential leak paths. They also have a lower system mass. This reduces loading and vibration stresses, further improving safety and reliability.
Parker’s ProBloc valves are available in a range of configurations, including double-block, block-and-bleed, and block-bleed-block. Standard flange sizes include 1/2", 3/4", 1”, 1-1/2”, 2” and 3”. There are extensive choice of flange classes, from ANSI 150 to 2500. The pressure rating and operating temperature range depend on the type of valves specified by the customer.
There is a choice of 10, 15, 20 and 25 mm ball valve bore sizes. The standard outlet has a female NPT connection and matches the size of the valve bore. A wide range of alternative metric sizes, from 6 to 25 mm, and imperial sizes, from 1/4" to 1” is available, and other connection options include male NPT, and Parker CPI© single ferrule and A-LOK™ double ferrule compression fittings.
Features/Benefits:
Reduced leak paths
Less weight and space required
No welded joints
No support required
Ease of operation
In situ calibration
Simple design
One piece forged construction
API and DIN standard versions
Reduced installation costs
Corrosion resistant alloys
Applications:
Instrument isolation
Inline process isolation
For additional information, click here.